The 41 Cadillac project is ongoing and will be for quite a while. I decided the next part of the puzzle in this build would be the frame and suspension.  My choices were to use the 41 frame and incorporate the 2007 components into it, or cut up the 2007 and graft the unibody on to the 41. I opted for the first to keep the 41 frame. The 41 Engine, transmission, rear end and body was removed and the frame stripped.  The body bolts to the frame were badly rusted and had to be cut off . I could not reach the rear fender bolts to cut them off and will remove them later.  The steering column was unbolted from the frame and stayed with the body until I decide what the steering will be.  Put the body on a couple of moving dolly's so I can move it around.   Engine, trans., rear end and suspension were next and are for sale. If any one is interested I can be E-Mailed at austinpeakrd@gmail.com for more info.  The engine has 138,000 miles on it and is a 346 CI flat hea