GOOD GUYS SCOTTSDALE

By -
Each November we try to go to the Good Guys Scottsdale show as we like the RV area and the large number of cars they draw each year.   This year there were over 3000 cars and trucks. We took Karen's 53 Kaiser as Hot Rods By Dean ask us to put the car in their booth to show the wide variety of work they do. We arrived on Thursday and took the car to the Dean booth that afternoon, the show did not open until Friday.

 Friday was fairly busy and we spent most of the day at the show. About 2 that afternoon my daughter  came to the RV with 4 of my Grand children and brought Thanksgiving dinner for us to share. We had Ham, dressing, veggies and a plate of fancy pears  along with sparkling cider. All very good and we had a wonderful visit
 Saturday morning you had to there early as a lot of cars, trucks and people showed up.

 Very nicely done 30's Dodge.
 How about a Hudson Metropolitan with a 350 Chevy V8 in it.
 Top 10 34 Ford.
 Top 10 Packard.
 Top 10 Gram.
 Restored 39 La Sal.



 The Kaiser Daren Brothers from Tucson brought all 3 of there Daren's.
 There were lots of rat rods this one was almost to nice to call a rat rod.
 This was the last car show for the year for us and look forward to see what 2018 will bring.

Comments

Dragonquillca said…
Love all the work you've put into the T-Bird. Great pictures too! Keep up the good work. You have a new fan and follower here!
December 2, 2017 at 8:34 AM
Post a Comment

Popular posts from this blog

By -
Image
  CHOPPED 51 FOR SALE By  Ron's Hot Rods   -  August 19, 2019 We are considering selling our very special 51 Ford 4 door that has been heavily modified.  We have won multiple awards including Grand National Radical Hardtop 2nd place and Sacramento Autorama Radical Hardtop 1st place.  All information regarding complete build and description available upon request.  Contact Ron Austin via email:  austinpeakrd@gmail.com or comments in blog post. Paint - Sky Blue with Sunset Flames, Custom designed flames with pin stripping, Top chopped 3", lengthened 4", rain gutters removed, Hood peaked & louvered, Nosed, decked, door handles & side trim removed, seams filled, Gas filler relocated, Headlights frenched, Fire wall & inner finders filled and smoothed, Bumpers filled, One piece front & back glass custom made, Custom made rear & trunk floor pans, Bottom of car finished and painted, Hand formed interior trunk panels, One piece door gla...
Read more

RV shelter mezzine extension and inclouser

By -
Image
 I guess I was on a roll after the solar project as I continued to look for an additional project to use up some of the materials that has been collected over the years. The largest being the 4'X8' & 4'X10' AIRLIGHT building panels from Wanessa-Sue Inc. that are the same construction as the ones used for the caboose project, posted a few years ago.  The RV Shelter is completely home made from 2' heavy wall conduit for posts and trusses, 2x4's, and Home Depot metal siding and roof panels. The side and end wall have been insulated with 5 1/2" panels that were free from Wanessa-Sue as they were flawed and not sellable. The existing mezzine is 20' wide by 8' deep built in 2007 that has been used for storage and car restoration projects. The concrete slab is 20' X 10' and we were going to extend it 20' but decided the cost was too much. A Laser level was used to get the elevation level correct for the 10'exrension to the next 2' p...
Read more

Solar Project

By -
Image
Our existing solar system is 20 years old and needed to be updated. I contacted Wind and Solar (NAZ Solar) in Flagstaff for advice and cost for a new system and they recommended a Hybrid Sol-Ark inverter with 400-watt solar panels and had all components in stock. We ordered the new system, and I started taking the old one down. Existing main panel with solar disconnect. Old solar panels. Existing 3000 watt inverter. Next 3 is the existing 20 year old panels. Existing 18 panels are 175 watt. It took 2 weeks to take the existing system down and to receive the new components. New 18–400-watt panels are 5' 8' tall and 3' 8' wide and too large for me to handle myself. My son and 2 of my grandsons came from California over the weekend to put the new panels in place. New Sol-Ark 15K inverter and battery system. Below is the existing support system that was reused. Hope this new system will last another 20 years.
Read more