The priming of the miscellaneous parts for the Kaiser went well as the weather was nice and I was able to paint outside. I used PPG self etching epoxy primer DPLF and prepared the bare metal with "metal Prep" a 50/50 mixture with water then wiped the area down with a 50/50 mixture of PPG Dx330 wax and grease remover and lacquer thinner cleaning a 2' x2' area at a time as recommended, so as not to let the metal prep dry. I had 2 quarts of paint that make 1 gal. using the epoxy part 2 additive, and ran out of paint before I could get to the inside of the body, that turned out to be a good thing because I had to complete the center console, weld in studs to fasten the A/C system, electrical panels, emergency brake and hood latch. The 66 T-Bird console is 9" too short for the Kaiser interior so an extension piece was hand formed and welded to the back of the console to extend it to the back seat. Filler plates were cut, fit and welded into place in the top front of t...