Kingman Street Drags

By -



Last weekend Kingman Arizona held its annual street drags in old town on Historic Route 66. Beale Street was barricaded off, grand stands set-up and a timing system with christmas tree lights set-up at the starting line. The event is sponsored by Napa Racing, Snap-on Tools and many local businesses and the City of Kingman. The Mayor, Sheriff of Mohave County and the Chief of Police all raced. Major drove an altered coupe with a blown big block in it and the Sheriff and Chief of Police drag raced each other in new Hemi Powered Chryslers prepared by the local dealer. Two Kingman Motorcycle Cops raced their police bikes with lights and sirens going.





I had my picture taken with "Miss Wings and Wheels" Queen Kimmie. Route 66 Wings and Wheels Inc. puts on this event and other fund raising events with the goal of building a multi-faceted motor sports facility in Kingman.







All types of vehicles were run in different classes, truck, sport compact, pure street, hot rod, pro street, motorcycle/quad and unlimited class. The unlimited and pro street were the most exciting with an alcohol dragster, funny car, a bunch of altered cars and some really nice pro street cars along with the hot rods and burn out contest it was a great weekend for drag racing and the weather co-operated with temperatures in the 80's and a light breeze.







There was media coverage with Fox Sport Network TV, Speed Scene TV and dozens of magazines, local radio stations covering the event. You can get more information at www.route66wingsandwheels.com or www.kingmanstreetdrags.com.

A couple of friends drove up from LA for Saturday and my wife went to her first drag race with me on Sunday. We all had a great time.

Comments

Post a Comment

Popular posts from this blog

By -
Image
  CHOPPED 51 FOR SALE By  Ron's Hot Rods   -  August 19, 2019 We are considering selling our very special 51 Ford 4 door that has been heavily modified.  We have won multiple awards including Grand National Radical Hardtop 2nd place and Sacramento Autorama Radical Hardtop 1st place.  All information regarding complete build and description available upon request.  Contact Ron Austin via email:  austinpeakrd@gmail.com or comments in blog post. Paint - Sky Blue with Sunset Flames, Custom designed flames with pin stripping, Top chopped 3", lengthened 4", rain gutters removed, Hood peaked & louvered, Nosed, decked, door handles & side trim removed, seams filled, Gas filler relocated, Headlights frenched, Fire wall & inner finders filled and smoothed, Bumpers filled, One piece front & back glass custom made, Custom made rear & trunk floor pans, Bottom of car finished and painted, Hand formed interior trunk panels, One piece door gla...
Read more

RV shelter mezzine extension and inclouser

By -
Image
 I guess I was on a roll after the solar project as I continued to look for an additional project to use up some of the materials that has been collected over the years. The largest being the 4'X8' & 4'X10' AIRLIGHT building panels from Wanessa-Sue Inc. that are the same construction as the ones used for the caboose project, posted a few years ago.  The RV Shelter is completely home made from 2' heavy wall conduit for posts and trusses, 2x4's, and Home Depot metal siding and roof panels. The side and end wall have been insulated with 5 1/2" panels that were free from Wanessa-Sue as they were flawed and not sellable. The existing mezzine is 20' wide by 8' deep built in 2007 that has been used for storage and car restoration projects. The concrete slab is 20' X 10' and we were going to extend it 20' but decided the cost was too much. A Laser level was used to get the elevation level correct for the 10'exrension to the next 2' p...
Read more

Solar Project

By -
Image
Our existing solar system is 20 years old and needed to be updated. I contacted Wind and Solar (NAZ Solar) in Flagstaff for advice and cost for a new system and they recommended a Hybrid Sol-Ark inverter with 400-watt solar panels and had all components in stock. We ordered the new system, and I started taking the old one down. Existing main panel with solar disconnect. Old solar panels. Existing 3000 watt inverter. Next 3 is the existing 20 year old panels. Existing 18 panels are 175 watt. It took 2 weeks to take the existing system down and to receive the new components. New 18–400-watt panels are 5' 8' tall and 3' 8' wide and too large for me to handle myself. My son and 2 of my grandsons came from California over the weekend to put the new panels in place. New Sol-Ark 15K inverter and battery system. Below is the existing support system that was reused. Hope this new system will last another 20 years.
Read more