Sad News From Northern California

By -
We have been in Northern California since last friday. My beloved oldest grandson died on Sunday June 11th. Services will be held Saturday June 23, 2007 at the Hessel Church 11 a.m.

I will post about cars when we get home again.

Ron

Comments

Todd said…
Ron.
Very sorry to hear about your gransdon. My thoughts are with you and your family.
June 22, 2007 at 9:28 AM
Anonymous said…
Oi, achei teu blog pelo google tá bem interessante gostei desse post. Quando der dá uma passada pelo meu blog, é sobre camisetas personalizadas, mostra passo a passo como criar uma camiseta personalizada bem maneira. Até mais.
July 3, 2007 at 3:07 AM
Anonymous said…
Ron,

Sorry to hear about your grandson. You and your family are in my thoughts.

John Edwards...
July 10, 2007 at 8:00 AM
Post a Comment

Popular posts from this blog

68 Mustang #12 - It run's but there are problems

By -
Image
 To get the car running it needed a fuel pump as the front cover on the engine did not have a opening for a mechanical pump (it is a fuel injected block with a in-tank pump). I have converted it to a carburetor that requires a low-pressure pump. I bought a Carter electric pump as I have had good luck with them on past projects. Next expensive item was a drive shaft that cost $350.00 from South West Speed Driveline in Arkansas. The driveshaft was painted before it was installed. It came with a transmission slip yoke that did not fit the T5 and I had to order a different one to fit the u-joint and transmission. I did not read all the information that's on their website and could have avoided the extra cost but that's what happens when you assume you know what your doing. When I tried to start the engine, it would not start using the key and did start using a handheld start switch on the starter solenoid, so I started tracing wires and found some misconnected wires from the wiring...
Read more

GRAND NATIONAL ROADSTER SHOW

By -
Image
January 21 to 26 2015 we took the 1953 Kaiser "Karens Kaiser" to the Grand National Roadster Show "The Grand Daddy of Them All"  We stayed at the KOA RV Park next to the Fairplex, unloaded the car from the trailer on Thursday morning and carried the display carpet sticking out of the passenger window. Waited in line an hour before they would let us into the building.  We got in, unloaded the carpet & lay'ed it down, moved the car in place and started the display setup that took 2 hours including the cleaning.  One of the outstanding was this hand formed all aluminum car.  This 1947 Hudson truck won first place and best paint.  Moor beautiful hot rods.  This is one of 13 contenders for most beautiful roadster.  The theme was The Grate Gatsby and lots of people dressed up.  This 1959 Cadillac De Ville is from Italy and was hung up in customs untill just before the show.  Lots of low riders...
Read more

68 Mustang #16 Project almost complete

By -
Image
 The project is almost complete as far as I want to take it at this time. It needs some body work and paint, front grill assembly and wheel alignment. I will get the wheel alignment a little closer, then it can be driven. I've had the car for a year and did not spend a lot of money on it as it came with a lot of parts, some usable some not and some needed to be altered, that was a good challenge. The new bearings, crush sleeve and spacers came and the rearend pinion assembler was rebuilt. I started a new project to keep myself busy and got out all my stained-glass tools and supplies to make a stained-glass window for the south side of the caboose (If you search my blog for caboose, you can see the complete build). Step one is to draw a picture of what you want the window to look like, I chose cranes, clouds and mountains. After some changes the drawing was transferred to a clean sheet using carbon paper. The glass came in 12' X 12" sheets and were laid out on the picture t...
Read more