Once the back of the car was back together I made brackets for the rotisserie to bolt to the bumper bracket mounts and got it mounted. I turned it so I could work on the top first where there were 5 rust through holes.  The entire top was striped to bear metal so all the rust damage could be treated  There was glue still on the paint from the vinyl top that was on the car that had to be stripped off.  Above and below are a couple of spots of the holes and rust ruts .  I used a 3M paint & rust stripper disc for paint removal.  Above all the holes are welded up and a rust treatment has been applied and below body filler has been applied. The top was then blocked sanded for a smooth finish.  This is rust holes at the bottom left corner of the back window and top corner of the trunk and below is after the repair is done.  This is before and after the right fender inner panel at the battery location has been replaced...